The correct use of water pumps
Oct 25,2024

Choose the right pump: choose the right pump according to the water quality, for example, use corrosion-resistant pumps to pump seawater, and use mud pumps to pump muddy water.
Installation steps:
Put the water pump smoothly to the bottom of the water, avoid pulling the power cord, you can use nylon rope and other aids.
The power line wiring position should be higher than the water level and good insulation, the power supply must be with grounding wire.
Use steps:
Place the suction hose in the pool or bucket, turn on the power and start the equipment.
Operate the high-pressure water gun for car washing operation, adjust the water pressure within the range of 120 to 150.
Maintenance Steps:
Run the water pump in clean water after use to discharge impurities and avoid caking to affect the next use.
Regularly check the operating condition of the water pump to ensure that there are no leaks in the pipes and that the power cord and plug are dry.
Specific use of different types of water pumps
Car wash water pump:
Place the suction pipe in the pool or bucket, turn on the power and start the device.
Operate the high-pressure water gun to carry out car washing operations, adjust the water pressure within the range of 120 to 150.
Household booster pump:
Install close to the water source and drain, making sure to keep it away from heat sources, direct sunlight, dusty and humid areas.
Set the correct pressure value to avoid excessive highs that can cause pipe ruptures.
Circulation pump:
Fill with water before switching on and never run empty.
Connect the vacuum container with a vacuum hose and do not need to switch on the external circulating water during normal operation.
Contact Us
E-mail :
Jenny@cnhnby.com
Tel:
+86-576-89930666
WhatsApp:
8615068607738
Address:
Wenling, Taizhou, Zhejiang, China